Bosch GLM 250VF vs GLM 50 C - Where are the differences?
Where are the differences?
Let's take the two laser distance meters GLM 250VF and GLM 50 C the Make Bosch in the comparison and look at the differences.
measuring range / distance
The measuring range of a laser rangefinder is extremely important. The number describes the maximum distance the device can measure. For most devices the maximum distance can be derived from the name.
With a maximum distance of 250,00 m the Bosch GLM 250VF offers more measuring range than the Bosch GLM 50 C with 50,00 m. Theoretically, the larger measuring range is of course better. However, if you do not need so much distance, the smaller Bosch GLM 50 C is also sufficient.
The minimum distance is the Bosch GLM 250VF at 250,00 m. The Bosch GLM 50 C can determine a minimum distance of 50,00 m for the measuring range.
The indicated measuring range usually refers to ideal conditions. Poor weather conditions can affect the measuring range. This includes fog, for example. This is interesting for use on construction sites. In home use, this usually plays hardly any role. Under bad conditions the possible measuring range is smaller.
Measuring accuracy
The better a laser rangefinder is, the more accurate the results. The differences here are in the range of a few millimeters.
With +/- 1,50 mm the Bosch GLM 50 C has a lower measuring accuracy than the Bosch GLM 250VF with +/- 31,12 mm. In comparison the GLM 250VF performs better. Due to bad weather conditions the measuring accuracy can be worse. This is also the case with the measuring range.
Good rangefinders can output smaller steps in the measurement. Of course this also affects the accuracy of the measurement. The measurement results are output at the Bosch GLM 250VF in steps of 0,10 mm. Thus the device offers smaller steps than the GLM 50 C of Bosch in comparison. There the smallest step is at 0,50 mm.
Measurement functions
Most devices offer even more than simple distance measurement. This includes area function, room function and summation.
The area function is offered by both devices from the comparison. Here you can calculate the area from your measurements directly with the laser measuring device.
Both measuring devices from this comparison offer you a room function which allows you to determine volume (m³). Classically this function is used to determine a room size.
Both distance meters have 30 memory locations to store measured values.
Inclination measurement
With the inclination measurement angles can be determined. This is not possible with every laser rangefinder. In this comparison both devices offer you an inclination measurement.
Both cover a range of 360 °. The smallest measuring unit in the tilt measurement is the Bosch GLM 250VF at 0,20 °. For the Bosch GLM 50 C 0,10 ° are the smallest measuring units. The accuracy is at the Bosch GLM 250VF at 0,10 °. For the Bosch GLM 50 C the measuring accuracy of the slope is 0,20 °.
Accumulator and batteries
To save energy, both devices switch off automatically. The automatic switch-off time is 5 minutes for both measuring devices.